![(please configure the [header_logo] section in trac.ini)](/chrome/site/bertos_logo.png){kind=logo}
hw_sipo.h File Reference
Macro for HW_SIPO_H. More...
Go to the source code of this file.
Defines | |
| #define | SIPO_SET_LEVEL_LOW(dev) do { /* Implement me! */ } while (0) |
| Define generic macro to set pins logic level. | |
| #define | PULSE_LOW(dev) do { /* Implement me! */ } while (0) |
| Generate one low pulse on select line. | |
| #define | PULSE_HIGH(dev) do { /* Implement me! */ } while (0) |
| Generate one hight pulse on select line. | |
| #define | SIPO_SI_HIGH() do { /* Implement me! */ } while (0) |
| Define the procedure to drive serial input in sipo device (SI). | |
| #define | SIPO_SI_CLOCK(clk_pol) |
| Drive clock to shift SI data into latch. | |
| #define | SIPO_LOAD(device, load_pol) do { /* Implement me! */ } while (0) |
| Do everything needed in order to load dato into sipo. | |
| #define | SIPO_ENABLE() do { /* Implement me! */ } while (0) |
| Enable the shift register output. | |
| #define | SIPO_SET_LD_LEVEL(device, load_pol) do { /* Implement me! */ } while (0) |
| Set polarity for Load, Clk, SI signals. | |
| #define | SIPO_INIT_PIN() do { /* Implement me! */ } while (0) |
| Do anything that needed to init sipo pins. | |
Enumerations | |
| enum | SipoMap |
| Sipo ids map. | |
Detailed Description
Macro for HW_SIPO_H.
Definition in file hw_sipo.h.
